Setting Console Port Properties show console bits
4-8 Port Configuration
Parameters
Defaults
Ifport‐stringisnotspecified,flowcontrolwillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearflow controlforconsoleportcom.1.1:
Matrix(rw)->clear console flowcontrol com.1.1
show console bits
Usethiscommandtodisplaythenumberofbitspercharactersetforoneormoreconsoleports.
Syntax
show console bits [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,thebitspercharactersettingforallconsoleportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythebitspercharactersettingforconsoleportcom.1.1:
Matrix(rw)->show console bits com.1.1
Port Bits
------------ --------
com.1.1 8
set console bits
Usethiscommandtosetthenumberofbitspercharacterforoneormoreconsoleports.
Syntax
set console bits num-bits [port-string]
port‐string (Optional)Clearsflowcontrolforspecificconsoleport(s).
port‐string (Optional)Displaysthebitspercharactersettingforspecificconsole
port(s).