Managing Configuration and Image Files dir
2-82 Startup and General Configuration
slot6:
Filename: 04.21.03 (Active) (Boot)
Version: 04.21.03
Size: 5494579 (bytes)
Date: FRI JUL 30 08:50:40 2004
CheckSum: f564c266c3a5907a9f3750dd17db6999
Location: slot1
Compatibility: 7G4202-30, 7G4202-60, 7G4270-09, 7G4270-10, 7G4270-
12, 7G4282-41, 7H4202-72, 7H4203-72, 7H4284-49, 7H4382-25, 7H4382-
49, 7H4383-49, 7H4385-49, 7K4290-02, 2G4072-52
Files:
=====================================================
slot1:
FEB 24 2004 15:25:24 7060 sample.cfg
Table 2‐7providesanexplana tion ofthecommandoutput.
Table 2-7 dir Output Details
Output... What it displays...
Images Lists all the images resident in the chassis and information about each.
Filename Name of the image file stored in the local file system. Various flags
may be listed after the filename, including:
• (active) - Indicates this image is currently running.
• (boot) - Indicates this image is selected to boot on the next reset.
Version Firmware version of the image.
Size Size of image file in the local file system.
Date Date of image file in the local file system.
CheckSum MD5 checksum calculated across the entire image file, used for image
identity and verification.
Location Modules on which this image resides. The system automatically
mirrors all images to all other compatible modules in the system. A
user cannot selectively add or remove images from individual modules
while they reside in the same chassis.
Compatibility Module types on which this image is qualified to run. Attempting to run
an incompatible image on a given module will not succeed.
Files User maintained files, such as CLI configuration files. For details on
working with configuration files, refer to show config (“show config” on
page 2-85) and configure (“configure” on page 2-86.)
SlotN Lists user maintained files by slot location.
To Next Page
Loading...
Need help?
General