show lldp port remote-info Link Layer Discovery Protocol and LLDP-MED
Enterasys Matrix DFE-Gold Series Configuration Guide 3-23
show lldp port remote-info
Usethiscommandtodisplaytheremotesysteminformationstoredforaremotedeviceconnected
toalocalport.
Syntax
show lldp port remote-info [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,remotesysteminformationwillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Usage
Youcanusethisinformationtodetectmisconfigurationsorincompatibilitiesbetweenthelocal
portandtheattachedendpointdevice(remoteport).
Example
Thisexampleshowshowtodisplaytheremotesysteminformationstoredforportge.3.1.The
remotesysteminformationwasreceivedfromanIPphone,whichisanLLDP‐MED‐enabled
device.Table 3‐5describestheoutputfieldsthatareuniquetotheremotesysteminformation
displayedforaMED‐enableddevice.
Matrix(ro)->show lldp port remote-info ge.3.1
Local Port : ge.3.1 Remote Port Id : 00-09-6e-0e-14-3d
---------------------
PoE Pair Controllable/Used IEEE 802.3 Extensions Power via MDI TLV. Displayed only when a
port has PoE capabilities. Indicates whether pair selection can be
controlled on the given port (refer to RFC 3621). Value for Controllable
can be true or false. Value of Used can be signal (signal pairs only are
in use) or spare (spare pairs only are in use).
PoE Power Class IEEE 802.3 Extensions Power via MDI TLV. Displayed only when a
port has PoE capabilities. Indicates the power class supplied by the
port. Value can range from 0 to 4.
PoE Power Limit (mW) LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates the total power the port is
capable of sourcing over a maximum length cable, based on its current
configuration, in milli-Watts.
PoE Power Priority LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates the power priority
configured on the port. Value can be critical, high, or low.
Table 3-4 show lldp port local-info Output Details (continued)
Output... What it displays...
port-string
(Optional)Displaysremote systeminformationforoneorarangeof
ports.