Enterasys Matrix DFE-Gold Series

set time Setting Basic Device Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 2-41
set time
Usethiscommandtochangethetimeofdayonthesystemclock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetthesystemclockto7:50a.m:
Matrix(rw)->set time 7:50:00
show summertime
Usethiscommandtodisplaydaylightsavingstimesettings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaydaylightsavingstimesettings:
Matrix(rw)->show summertime
Summertime is disabled and set to ''
Start : SUN MAR 11 02:00:00 2007
[mm/dd/yyyy]
[hh:mm:ss]
Setsthetimein:
• month,day,yearand/or
•24‐hourformat
Atleastonesetoftimeparametersmustbeentered.