set maclock firstarrival Configuring MAC Locking
Enterasys Matrix DFE-Gold Series Configuration Guide 24-7
Example
ThisexampleshowshowtocreateaMAClockingassociationbetweenMACaddress00‐a0‐c9‐0d‐
32‐11andportfe.2.3:
Matrix(rw)->set maclock 00-a0-c9-0d-32-11 fe.2.3 create
set maclock firstarrival
UsethiscommandtorestrictMAClockingonaporttoamaximumnumberofendstation
addressesfirstconnectedtothatport.
Syntax
set maclock firstarrival port_string value
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtorestrictMAClockingto6MACaddressesonfe.2.3:
Matrix(rw)->set maclock firstarrival fe.2.3 6
set maclock move
UsethiscommandtomoveallcurrentfirstarrivalMACstostaticentries.
Syntax
set maclock move port-string
Parameters
Defaults
None.
port_string SpecifiestheportonwhichtolimitMAClocking.Foradetailed
descriptionofpossiblep o rt_stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
value SpecifiesthenumberoffirstarrivalendstationMACaddressestobe
allowedconnectionstotheport.Validvalues
are0to600.
port‐string SpecifiestheportwhereallcurrentfirstarrivalMACswillbemovedto
staticentries.Foradetaileddescriptionofpossibleport_stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage 4‐2.