Enterasys Matrix DFE-Gold Series

Configuring Policy Profiles set policy invalid action
8-6 Policy Classification Configuration
set policy invalid action
Usethiscommandtoassigntheactionthedevicewillapplytoaninvalidorunknownpolicy. 
Syntax
set policy invalid action {default-policy | drop | forward}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoassignadropactiontoinvalidpolicies:
Matrix(rw)->set policy invalid action drop
clear policy invalid action
Usethiscommandtoresettheactionthedevicewillapplytoaninvalidorunknownpolicytothe
defaultactionofapplyingthedefaultpolicy.
Syntax
clear policy invalid action
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoresettheinvalidpolicyaction:
Matrix(rw)->clear policy invalid action
default‐policy Instructsthedevicetoignorethisresultandsearchforthenextpolicy
assignmentrule.
drop Instructsthedevicetoblocktraffic.
forward Instructsthedevicetoforwardtrafficasifnopolicyhasbeenassigned.