Setting Auto-Negotiation and Advertised Ability set port mdix
4-32 Port Configuration
Defaults
Ifport‐stringisnotspecified,themodeforallportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayMDI/MDIXmodefor1‐GigabitEthernetport14inmodule3:
Matrix(rw)->show port negotiation ge.3.14
mdix configuration is auto on port fe.3.14
set port mdix
UsethiscommandtosetMDI/MDIXmodeononeormoreports.
Syntax
set port mdix [port-string] {auto | mdi | mdix}
Parameters
Defaults
Ifport‐stringisnotspecified,modewillbesetforallports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoforce1‐GigabitEthernetport14inmodule3toMDIXconfiguration:
Matrix(rw)->set port mdix ge.3.14 mdix
auto Displaysport(s)automaticallydeterminingMDI/MDIX.
mdi Displaysport(s)forcedtoMDIconfiguration.
mdix Displaysport(s)forcedtoMDIXconfiguration.
port‐string (Optional)Setsmodeforspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 4‐2.
auto Setsport(s)toautomaticallydetermineMDI/MDIX .
mdi Forcesport(s)toMDIconfiguration.
mdix Forcesport(s)toMDIXconfiguration.