Enterasys Matrix DFE-Gold Series - Set Lacp Outportalgorithm; Clear Lacp Outportalgorithm

set lacp outportAlgorithm Configuring LACP
Enterasys Matrix DFE-Gold Series Configuration Guide 4-71
Example
ThisexampleshowshowtodisplaythecurrentLACP:
Matrix(rw)->show lacp outportAlgorithmoutport algorithm
dip-sip
set lacp outportAlgorithm
UsethiscommandtosetthealgorithmLACPwilluseforoutportdetermination.
Syntax
set lacp outportAlgorithm {dip-sip | da-sa | round-robin}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosettheLACPoutportalgorithmtoDA‐SA:
Matrix(rw)->set lacp outportalgorithm da-sa
clear lacp outportAlgorithm
UsethiscommandtoresetLACPtoDIP‐SIP,itsdefaultoutportalgorithm.
Syntax
clear lacp outportAlgorithm
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
dip‐sip SpecifiesthatdestinationandsourceIPaddresseswilldeterminethe 
LACPoutport.
da‐sa SpecifiesthatdestinationandsourceMACaddresseswilldeterminethe
LACPoutport.
round‐robin Specifiesthattheround‐robinalgorithmwilldeterminetheLACP
outport.