Enterasys Matrix DFE-Gold Series

show cos reference Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-35
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearallportresourcesettingsassociatedwithClassofService
transmitqueue1inportgroup0.1:
Matrix(rw)->clear cos port-resource txq 0.1 1
show cos reference
UsethiscommandtodisplayClassofServiceportreferenceinformation.
Syntax
show cos reference [txq | irl group-type-index [reference]]
Parameters
Defaults
Ifnooptionsarespecified,allreferenceinformation forallporttypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtoshowalltransmitqueuereferenceconfigurationinformationforport
group0.1:
Matrix(rw)->show cos reference txq 0.1
Group Index Reference Type Queue
----------- --------- ---- ------------
0.1 0 txq 0
0.1 1 txq 0
0.1 2 txq 0
0.1 3 txq 0
0.1 4 txq 1
0.1 5 txq 1
0.1 6 txq 1
0.1 7 txq 1
0.1 8 txq 2
0.1 9 txq 2
0.1 10 txq 2
0.1 11 txq 2
irl|txq (Optional)Displaysinboundratelimitingortransmitqueuereference
information.
group‐type‐index (Optional)Displaysinformationforaspecificportgroup/typeentry.
reference (Optional)Displaysinformationforaspecificreferenceentry.