Configuring Policy Class of Service (CoS) set cos port-resource irl
8-32 Policy Classification Configuration
set cos port-resource irl
UsethiscommandtoconfigureaClassofServiceinboundratelimitingportresourceentry.
Syntax
set cos port-resource irl group-type-index irl-number {[unit {percentage | kbps |
mbps | gbps}] [rate rate] [type { drop}] [syslog { disable | enable}] [trap { disable
| enable}] [disable-port {disable | enable}]}
Parameters
Defaults
•Ifarateisnotspecified,portdefaultswillbeapplied.
•Ifnotspecified,frameswillnotbedropped.
•Ifnotspecified,Syslogandportdisablingwillnotbeconfigured.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoconfigureClassofServiceportresourceIRLentry0forportgroup0.1
assigninganinboundratelimitof512kilobitspersecondThisentrywilltriggeraSyslogandan
SNMPtrapmessageifthisrateisexceeded:
Matrix(rw)->set cos port-resource irl 0.1 0 unit kbps 512 syslog enable trap enable
group‐type‐index Specifiesaninboundratelimitingportgroup/typeindexforthisentry.
Validentriesareinthe formofgroup.type.Groupcanbe0‐7,with0
designatingthedefaultgroup,and1‐7reservedforuser‐defined
groups.Defaultporttypevaluescannotbechanged,andare0
forthe
7GR4270‐12,7G4270‐12,7G4270‐09,and7G4270‐10DFEmodules,and1
forallothermodules.
irl-number
SpecifiesaninboundratelimiterIDtobeassociatedwiththisentry.
unitpercentage|
kbps|mbps|gbps
Specifiestheunitofmeasureaspercentageoftotalbandwidth,or
kilobits,megabits,orgigabitspersecond.
rate
rate (Optional)Datarateinunitsforthisinboundratelimiter.
typedrop (Optional)Specifiesthatframesexceedingthislimiterwillbedropped.
syslogdisable|
enable
(Optional)EnablesordisablesthegenerationofaSyslogmessagewhen
thislimiterisexceeded.
trapdisable|enable (Optional)Enablesordisablesthesendingofan
SNMPtrapmessage
whenthislimiterisexceeded.
disable‐portdisable|
enable
(Optional)Enablesordisablesthedisablingoftheviolatingportwhen
thislimiterisexceeded.
To Next Page
Loading...
Need help?
General