Enterasys Matrix DFE-Gold Series

set cep port Configuring Convergence End Points (CEP) Phone Detection
Enterasys Matrix DFE-Gold Series Configuration Guide 25-43
Defaults
Disabled.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtogloballyenableCEPdetection:
Matrix>set cep enable
set cep port
UsethiscommandtoenableordisableaCEPdetectiontypeononeormoreports.
Syntax
set cep port port-string {cisco | h323 | lldp-med | siemens | sip} {enable |
disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableCiscophonedetectiononportfe.3.1:
Matrix>set cep port fe.3.1 cisco enable
set cep policy
UsethiscommandtosetaglobaldefaultpolicyforaCEPdetectiontype.
Syntax
set cep policy {cisco | h323 | siemens | sip} index
port‐string Specifiestheport(s)toenableordisable.Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 4‐2.
cisco SettheCiscodetectionstatusonthespecifiedports.
h323 SettheH323detectionstatusonthespecif iedports.
lldp‐med Set
theLLDP‐MEDdetectionstatusonthespecifiedports.
siemens SettheSiemensdetectionstatusonthespecifiedports.
sip SettheSIPdetectionstatusonthespecifiedports.
enable|disable EnablesordisablesCEPdetectionasspecified .