Enterasys Matrix DFE-Gold Series

Configuring MAC Authentication clear macauthentication reauthperiod
25-36 Authentication Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
ThisisthetimelapsebetweenattemptstoreauthenticateanycurrentMACaddressauthenticated
toaport.
Example
ThisexampleshowshowtosettheMACreauthenticationperiodto7200seconds
(2hours)onge.2.1through5:
Matrix(rw)->set macauthentication reauthperiod 7200 ge.2.1-5
clear macauthentication reauthperiod
UsethiscommandtocleartheMACreauthenticationperiodononeormoreports.
Syntax
clear macauthentication reauthperiod [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,thereauthenticationperiodwillbeclearedonallports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtogloballycleartheMACreauthenticationperiod:
Matrix(rw)->clear macauthentication reauthperiod
time Specifiesthenumberofsecondsbetweenreauthenticationattempts.
Validvaluesare1‐4294967295.
port‐string Specifiestheport(s)onwhichtosettheMACreauthenticationperiod.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 4‐2.
port‐string (Optional)ClearstheMACreauthenticationperiodonspecificport(s).
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 4‐2.