show maclock Configuring MAC Locking
Enterasys Matrix DFE-Gold Series Configuration Guide 24-3
Parameters
Defaults
Ifport_stringisnotspecified,MAClockingstatuswillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayMAClockinginformationforge.2.1through5:
Matrix(rw)->show maclock ge.2.1-5
MAC locking is globally enabled.
Port Port Trap Max Static Max FirstArrival Violating
Number Status Status Allocated Allocated MAC Address
-------- -------- -------- ---------- ---------------- -----------------
ge.2.1 enabled enabled 20 600 00-00-00-00-00-00
ge.2.2 enabled enabled 20 600 00-00-00-00-00-00
ge.2.3 enabled enabled 20 600 00-00-00-00-00-00
ge.2.4 enabled enabled 20 600 00-00-00-00-00-00
ge.2.5 enabled enabled 20 600 00-00-00-00-00-00
Table 24‐1providesanexplanationofthecommandoutput.
port_string (Optional)DisplaysMAClockingstatusforspecifiedport(s).Fora
detaileddescriptionofpossibleport_stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
Table 24-1 show maclock Output Details
Output... What it displays...
Port Number Port designation. For a detailed description of possible port_string
values, refer to “Port String Syntax Used in the CLI” on page 4-2.
Port Status Whether MAC locking is enabled or disabled on the port. MAC locking
is globally disabled by default. For details on using set maclock
commands to enable it on the device and on one or more ports, refer to
“set maclock enable” on page 24-5 and “set maclock” on page 24-6.
Trap Status Whether MAC lock trap messaging is enabled or disabled on the port.
For details on setting this status using the set maclock trap
command, refer to “set maclock trap” on page 24-9.
Max Static Allocated The maximum static MAC addresses allowed locked to the port. For
details on setting this value using the set maclock static command,
refer to “set maclock static” on page 24-8.
Max FirstArrival Allocated The maximum end station MAC addresses allowed locked to the port.
For details on setting this value using the set maclock firstarrival
command, refer to “set maclock firstarrival” on page 24-7.
Violating MAC Address Most recent MAC address(es) violating the maximum static and first
arrival value(s) set for the port.