Enterasys Matrix DFE-Gold Series

clear netflow export-interval Configuring NetFlow
Enterasys Matrix DFE-Gold Series Configuration Guide 15-7
clear netflow export-interval
UsethiscommandtoclearNetFlowexportintervaltoitsdefaultof30minutes.
Syntax
clear netflow export-interval
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoreturntheNetFlowexportintervaltoitsdefaultvalue:
Matrix(rw)->clear netflow export-interval
set netflow port
UsethiscommandtoenableNetFlowcollectiononaport.
Syntax
set netflow port port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableNetFlowcollectiononportge.1.1:
Matrix(rw)->set netflow port ge.1.1 enable
port‐string SpecifiestheportorportsonwhichtoenableordisableNetFlow
collection.
enable|disable EnablesordisablesNetFlowcollection.