Enterasys Matrix DFE-Gold Series

clear radius-snooping flow Understanding RADIUS Snooper
Enterasys Matrix DFE-Gold Series Configuration Guide 26-7
clear radius-snooping flow
UsethiscommandtoclearallentriesorthespecifiedindexentryfromtheRSflowtable.
Syntax
clear radius-snooping flow {all | index}
Parameters
Defaults
None.
Mode
Read‐write.
Usage
Usetheindexvaluetoclearflowsforaparticularport.
Examples
Thisexampleclearsallflowtableentries:
Matrix(rw)->clear radius-snooping flow all
Thisexampleclearstheflowtableentryforindex5:
Matrix(rw)->clear radius-snooping flow 5
show radius-snooping
UsethiscommandtodisplayageneraloverviewoftheglobalRSstatus.
Syntax
show radius-snooping
Parameters
None.
Defaults
None.
Mode
Read‐Only.
all Specifiesthatallflowtableentriesaretobecleared.
index Specifiesaspecificflowtableindexentrytobecleared.