Enterasys Matrix DFE-Gold Series

set pwa guestname Configuring Port Web Authentication (PWA)
Enterasys Matrix DFE-Gold Series Configuration Guide 25-21
set pwa guestname
UsethiscommandtosetaguestusernameforPWAenhancedmodenetworking.
Syntax
set pwa guestname name
Parameters
Defaults
None.
Mode
Read‐Write.
Usage
Whenenhancedmodeisenabled(asdescribedin“setpwaenhancedmode”onpage 25‐20),PWA
willusethisnametograntnetworkaccesstoguestswithoutestablishedloginnamesand
passwords.
Example
ThisexampleshowshowtosetthePWAguestusernameto“guestuser”:
Matrix(rw)->set pwa guestname guestuser
clear pwa guestname
UsethiscommandtoclearthePWAguestusername.
Syntax
clear pwa guestname
Parameters
None.
Defaults
None.
Mode
Read‐Write.
Example
ThisexampleshowshowtoclearthePWAguestusername
Matrix(rw)->clear pwa guestname
name Specifiesaguestusername.