Configuring RIP key chain
21-8 Routing Protocol Configuration
Parameters
Defaults
None.
Mode
Routercommand,Interfaceconfiguration:Matrix>Router(config‐if(Vlan1))#
Usage
The“no”formofthiscommandrestoresthedefaultversionoftheRIPmodule updatepackets
thatareacceptedontheinterface.
Example
ThisexampleshowshowtosettheRIPreceiveversionto2forupdatepacketsreceivedonVLAN
1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip rip receive version 2
key chain
CreatesordeletesakeychainusedgloballyforRIPauthentication.
Syntax
key chain name
no key chain name
Parameters
Defaults
None.
Mode
Routercommand,Globalconfiguration:Matrix>Router(config)#
Usage
The“no”formofthiscommanddeletesthespecifiedkeychain.
1 SpecifiesRIPversion1.
2 SpecifiesRIPversion2.
12 SpecifiesRIPversions1and2.
none SpecifiesthatnoRIProuteswillbeprocessedonthisinterface.
name Specifiesanameforthekeychain.