Assigning Classification Rules to Policy Profiles show policy capability
8-10 Policy Classification Configuration
show policy capability
UsethiscommandtodisplayallpolicyclassificationcapabilitiessupportedbyyourEnterasys
MatrixSeriesdevice.
Syntax
showpolicycapability
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Usage
Theoutputofthiscommandshowsatablelistingclassifiabletrafficattributesandthetypeof
actions,byruletype,thatcanbeexecutedrelativetoeachattribute.Abovethetableisalistofall
theactionspossibleonthisdevice.
Theleft‐mostcolumnofthetablelistsall
possibleclassifiabletrafficattributes.Thenexttwo
columnsfromtheleftindicatehowpolicyprofilesmaybeassigned,eitheradministrativelyor
dynamically.Thenextfourcolumnsfromtheleftindicatetheactionsthatmaybeperformed.The
lastthreecolumnsindicateauditingoptions.
Anxinanactioncolumnfora
trafficattributerowindicatesthatyoursystemhasthecapabilityto
performthatactionfortrafficclassifiedbythatattribute.
Example
ThisexampleshowshowtodisplayyourEnterasysMatrixSeriesdevice’spolicyclassification
capabilities.Inthiscase,EnterasysMatrixDFE‐PlatinumSeriescapabilitiesareshown.Referto
“setpolicyrule”onpage 8‐13foradescriptionoftheparametersdisplayed:
Matrix(rw)->show policy capability
The following supports related to policy are supported in this device:
VLAN Forwarding Priority Permit
Deny TCI Overwrite Rule-Use Notification
Rules Table Rule-Use Accounting
Longest Prefix Rules Port Disable Action
=============================================================
| | D | | | | | F | | | D |
| | Y | | | | | O | S | | I |
| | N | A | | | | R | Y | | S |
| | A | D | V | | D | W | S | T | A |
| | M | M | L | C | R | A | L | R | B |
| | I | I | A | O | O | R | O | A | L |
| SUPPORTED RULE TYPES | C | N | N | S | P | D | G | P | E |
=============================================================