Configuring Policy Class of Service (CoS) show cos port-type
8-24 Policy Classification Configuration
show cos port-type
UsethiscommandtodisplayClassofServiceporttypeconfigurations.
Syntax
show cos port-type [irl | txq] [index-list]
Parameters
Defaults
Ifnotspecified,allratelimitinginformationforallporttypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Usage
TheEnterasysMatrixSeriesCoSimplementationprovidestwodefaultporttypegroupingsfor
designatingavailableratelimitingandtransmit queueresourcesondevicemodules.Porttype0
designatesoneof7GR4270‐12,7G4270‐12,7G4270‐09,or7G4270‐10DFEmodules.Porttype1
designatesallothermodules,includingDFE‐Gold
andNSAmodules.Otherportgroupingscan
beconfiguredusingthecommandsinthissection.
Example
ThisexampleshowshowtodisplayallClassofServiceporttypeinformation.Inthiscase,nonew
portgroupshavebeenconfigured,soinformationforthetwodevicedefaultgroupsof0and1are
shown:
Matrix(rw)->show cos port-type
Number of resources: Supported rate types:
txq = transmit queue(s) perc = percentage
irl = inbound rate limiter(s) pps = packets per second
orl = outbound rate limiter(s) Kbps = kilobits per second
Mbps = megabits per second
Gbps = gigabits per second
Tbps = terabits per second
Number of
slices /
Port type Number of Supported Eligible Unselected
Index description queues rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 16Q 64/16 perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
irl|txq (Optional)Displaysinboundratelimitingortransmitqueue
information.
index‐list (Optional)Displaysinformationforaspecificporttype.