Configuring Port Web Authentication (PWA) clear dot1x auth-config
25-12 Authentication Configuration
•allowaccesstoaserver(atIP1.2.3.4)thatactsasbothaDNSandDHCPserver,and
•beassignedasthedefaultpolicyprofileforallFastEthernetports.
Matrix(rw)->set policy rule 1 ether 0x806 forward
Matrix(rw)->set policy rule 1 ipdest 1.2.3.4 forward
Matrix(rw)->set policy rule 1 udpdest 67 forward
Matrix(rw)->set policy rule 1 updsource 68 forward
Matrix(rw)->set policy port fe.*.* 1
Also,thePWAclientmustbeconfigured(statically,orthroughDHCP)tohaveroutestoboththe
resolvedURL(alocalroute,oranactualgateway)andthePWAIPaddress.DHCPmaybe
configuredtoexplicitlyreturnastaticroutefortheclient,ortoinformtheclientthatall
routesare
local(meaningtheclientisitsowndefaultgateway).
Formoreinformationonconfiguringpolicyprofiles,refertoChapter 8.
FormoreinformationonconfiguringDHCP,referto“DHCPOverview”onpage 20‐1.
Purpose
Toreview,enable,disable,andconfigurePortWebAuthentication(PWA).
Commands
For information about... Refer to page...
show pwa 25-13
set pwa 25-15
set pwa hostname 25-15
clear pwa hostname 25-16
show pwa banner 25-16
set pwa banner 25-17
set pwa displaylogo hide 25-17
clear pwa banner 25-17
set pwa displaylogo 25-18
set pwa redirecttime 25-18
set pwa ipaddress 25-19
set pwa protocol 25-19
set pwa enhancedmode 25-20
set pwa guestname 25-21
clear pwa guestname 25-21
set pwa guestpassword 25-22
set pwa gueststatus 25-22
set pwa initialize 25-23
set pwa quietperiod 25-23