Enterasys Matrix DFE-Gold Series

show system password Setting User Accounts and Passwords
Enterasys Matrix DFE-Gold Series Configuration Guide 2-19
Theadminpasswordcanberesetbytogglingdipswitch8onthedeviceasdescribedinyour
MatrixSeriesInstallationGuide.
Examples
Thisexampleshowshowasuper‐userwouldchangetheRead‐Writepasswordfromthesystem
default(blankstring):
Matrix(su)->set password rw
Please enter new password: ********
Please re-enter new password: ********
Password changed.
Matrix(su)->
ThisexampleshowshowauserwithRead‐Writeaccesswouldchangehispassword:
Matrix(rw)->set password
Please enter old password: ********
Please enter new password: ********
Please re-enter new password: ********
Password changed.
Matrix(rw)->
show system password
Usethiscommandtodisplaycurrentpasswordconfigurationsettings.
Syntax
show system password
Parameters
None.
Defaults
None.
Mode
Switchcommand,SuperUser.
Example
Thisexampleshowshowtodisplaypasswordconfigurationsettings.Inthiscase,thesettings
displayedarethedefaultsettings:
Matrix(su)->show system password
Password history size : 0
Password aging : disabled
Password minimum length: 8
Password minimum character requirements:
Uppercase: 0
Lowercase: 0