Configuring Policy Class of Service (CoS) show cos violation irl
8-40 Policy Classification Configuration
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearthepriorityandtransmitqueuereferencevaluesforCoSentry2:
Matrix(rw)->clear cos settings 2 priority txq-reference
show cos violation irl
UsethiscommandtodisplayClassofServiceviolationconfigurations.
Syntax
show cos violation irl [violation-index]
Parameters
Defaults
Ifnooptionsarespecified,allinboun d ratelimitingviolationinformationwillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowanyCoSinboundrate limitingviolations:
Matrix(rw)->show cos violation irl
There are no ports disabled by any irl rate limiters
clear cos violation irl
UsethiscommandtoclearClassofServiceinboundratelimitingviolationconfigurations.
Syntax
clear cos violation irl {all | disabled-ports | violation-index} {both | status |
counter}
tos‐value ClearstheTypeofServicevalueassociatedwiththisentry.
txq‐reference Clearsthetransmitqueuereferenceassociatedwiththisentry.
irl‐reference Clearstheinboundratelimitingreferenceassociatedwiththisentry.
violation‐index (Optional)Displaysinformationforaspecificviolationindex.Valid
entriesareintheformof
port-list:irl-list,or *.*.*:*forallentries.