Enterasys Matrix DFE-Gold Series

DHCP Overview
Enterasys Matrix DFE-Gold Series Configuration Guide 20-5
Commands
DHCP Class
Configuration
Mode
Configure a DHCP
client class.
Type client-class and
the client class name
from DHCP Pool or
Host Configuration
Mode.
Matrix>Router
(config-dhcp-class)#
DHCP Host
Configuration
Mode
Configure DHCP
host parameters.
Type client-
identifier and the
identifier, or
hardware-address
and an address from
any DHCP
configuration mode.
Matrix>Router
(config-dhcp-host)#
Table 20-2 DHCP Command Modes (continued)
Mode Usage Access Method Resulting Prompt
For information about... Refer to page...
ip dhcp server 20-6
ip local pool 20-6
exclude 20-7
ip dhcp ping packets 20-8
ip dhcp ping timeout 20-8
ip dhcp pool 20-9
domain-name 20-9
dns-server 20-10
netbios-name-server 20-11
netbios-node-type 20-11
default-router 20-12
bootfile 20-13
next-server 20-13
option 20-14
lease 20-15
host 20-16
client-class 20-16
client-identifier 20-17
client-name 20-18
hardware-address 20-18
show ip dhcp binding 20-19