Enterasys Matrix DFE-Gold Series

Configuring Flow Setup Throttling (FST) clear flowlimit notification interval
24-34 Security Configuration
clear flowlimit notification interval
UsethiscommandtoresettheSNMPflowlimitnotificationintervaltothedefaultvalueof120
seconds.
Syntax
clear flowlimit notification interval
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresettheSNMPflowlimitnotificationinterval:
Matrix(rw)->clear flowlimit notification interval
clear flowlimit stats
Usethiscommandtoresetflowlimitingstatisticsbacktodefaultvaluesononeormoreport(s).
Syntax
clear flowlimit stats [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,statisticswillberesetonallports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetflowlimitingstatisticsbacktodefaultvaluesonFastEthernet
port5inmodule1:
Matrix(rw)->clear flowlimit stats fe.1.5
port‐string (Optional)Resets flowlimitingstatisticsonspecificport(s).