Enterasys Matrix DFE-Gold Series

Setting Speed and Duplex Mode set port duplex
4-26 Port Configuration
Example
Thisexampleshowshowtodisplaythedefaultduplexsettingfor1‐GigabitEthernetport14in
module3:
Matrix(rw)->show port duplex ge.3.14
default duplex mode is full on port ge.3.14.
set port duplex
Usethiscommandtosetthedefaultduplextypeforoneormoreports.
Syntax
set port duplex port-string {full | half}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Thiscommandwillonlytakeeffectonportsthathaveauto‐negotiationdisabled.
Example
ThisexampleshowshowtosetFastEthernetport17inmodule1tofullduplex:
Matrix(rw)->set port duplex fe.1.17 full
port‐string Specifiestheport(s)forwhichduplextypewillbeset.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
full|half Setstheport(s)tofull‐duplexorhalf‐duplexoperation.