Enterasys Matrix DFE-Gold Series

set dot1x Configuring 802.1X Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 25-7
set dot1x
Usethiscommandtoenableordisable802.1Xauthentication,toreauthenticateoneormoreaccess
entities,ortoreinitializeoneormoresupplicants.
Syntax
set dot1x {[enable | disable] [init | reauth [port-string] [index index-list]}
Parameters
Defaults
Ifnotspecified,thereinitializationorreauthenticationsettingwillbeappliedtoallports.
Ifindexisnotspecified,allaccessentitieswillbeaffected.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtoenable802.1X:
Matrix(rw)->set dot1x enable
Thisexampleshowshowtoreinitializefe.2.24:
Matrix(rw)->set dot1x init fe.2.24
set dot1x auth-config
Usethiscommandtoconfigure802.1Xauthentication.
Syntax
set dot1x auth-config {[authcontrolled-portcontrol {auto | forced-auth | forced-
unauth}] [keytxenabled{false | true}] [maxreq value] [quietperiod value]
[reauthenabled {false | true}] [reauthperiod value] [servertimeout timeout]
[supptimeout timeout] [txperiod value]} [port-string]
enable|disable Enablesordisables802.1X.
init|reauth Reinitializesoneormoreaccessentitiesorreauthenticatesoneormore
supplicants.
port‐string (Optional)Specifiestheport(s)toreinitializeorreauthenticate.
indexindex‐list (Optional)Specifiesoneormoreaccessentitiesonwhichtoenable
initializationorreauthenticationcontrol.Validvaluesare0
‐8191.