Enterasys Matrix DFE-Gold Series

set mtu Enabling or Disabling the Path MTU Discovery Protocol
Enterasys Matrix DFE-Gold Series Configuration Guide 2-91
set mtu
Usethiscommandtodisableorre‐enablepathMTUdiscoveryprotocolonthedevice.
Syntax
set mtu {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodisablepathMTUdiscovery:
Matrix(rw)->set mtu disable
clear mtu
UsethiscommandtoresetthestateofthepathMTUdiscoveryprotocolbacktoenabled.
Syntax
clear mtu
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetthestateofMTUdiscovery:
Matrix(rw)->clear mtu
enable|disable EnablesordisablespathMTUdiscoveryprotocol.