show ip vrrp Configuring VRRP
Enterasys Matrix DFE-Gold Series Configuration Guide 21-71
Defaults
None.
Mode
Routercommand,Interfaceconfiguration:Matrix>Router(config‐if(Vlan1))#
Usage
The“no”formofthiscommandclearsVRRPMD5authentication.
Example
ThisexampleshowshowtosettheVRRPMD5authenticationpasswordto“qwer”onVLAN1,
VRID1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip vrrp message-digest-key 1 md5 qwer
show ip vrrp
UsethiscommandtodisplayVRRProutinginformation.
Syntax
show ip vrrp
Parameters
None.
Defaults
None.
Mode
Routercommand,Anyroutermode.
Example
ThisexampleshowshowtodisplayVRRPinformation:
Matrix>Router(config)#show ip vrrp
-----------VRRP CONFIGURATION-----------
Vlan Vrid State Owner AssocIpAddr Priority VirtMacAddr
256 1 Backup 0 172.3.56.20 100 0000.5e00.0101
172.3.56.21
172.3.56.22
Table 21‐7providesanexplanationofthecommandoutput.