Enterasys Matrix DFE-Gold Series - Page 135

exit | quit Pausing, Clearing and Closing the CLI
Enterasys Matrix DFE-Gold Series Configuration Guide 2-93
Defaults
None.
Mode
Switchcommand,Read‐Only.
Usage
Bydefault,devicetimeoutoccursafter15minutesofuserinactivity,automaticallyclosingyour
CLIsession.Usethesetlogoutcommandasdescribedin“setlogout”onpage 2 ‐53tochangethis
default.
Whenoperatinginroutermode,theexitcommandjumpstoalowerconfigurationlevel.For
detailson
enablingrouterconfigurationmodes,referto“EnablingRouterConfigurationModes”
onpage 2‐103.
Example
ThisexampleshowshowtoexitaCLIsession:
Matrix(rw)->exit