Enterasys Matrix DFE-Gold Series

traceroute Reviewing IP Traffic and Configuring Routes
Enterasys Matrix DFE-Gold Series Configuration Guide 16-29
Parameters
Defaults
None.
Mode
Routercommand,PrivilegedEXEC:Matrix>Router#
Usage
ThreeICMPprobeswillbetransmittedforeachhopbetweenthesourceandthetraceroute
destination.
Examples
Thisexampleshowshowtousetraceroutetodisplayaroundtrippathtohost192.167.252.46.In
thiscase,hop1isanunnamedrouterat192.167.201.2,hop2is“rtr10”at192.4.9.10,hop3is
“rtr43”at192.167.208.43,andhop4isbacktothehostIPaddress.Roundtrip
timesforeachofthe
threeICMPprobesaredisplayedbeforeeachhop.Probetimeoutsareindicatedbyanasterisk(*):
Matrix>Router#traceroute 192.167.225.46
Traceroute to 192.167.225.46, 30 hops max, 40 byte packets
1 10.00 ms 20.00 ms 20.00 ms 192.167.201.2 []
2 20.00 ms 20.00 ms 20.00 ms 192.4.9.10 [enatel-rtr10.enatel.com]
3 240.00 ms * 480.00 ms 192.167.208.43 [enatel-rtr43.enatel.com]
4 <1 ms * 20.00 ms 192.167.225.46 [enatel-rtr46.enatel.com]
TraceRoute Complete
host SpecifiesahosttowhichtherouteofanIPpacketwillbetraced.