Enterasys Matrix DFE-Gold Series - Page 675

clear router limits (LSNAT) Configuring Load Sharing Network Address Translation (LSNAT)
Enterasys Matrix DFE-Gold Series Configuration Guide 19-35
Mode
Switchcommand,Read‐Write.
Usage
ThiscommandmustbeexecutedfromtheswitchCLI.
Example
Thisexampleshowshowtoresetallchassis‐basedLSNATlimits:
Matrix(rw)->clear router limits
Note: Router limits can also be cleared in the following contexts:
To clear NAT router limits see “clear router limits (NAT)” on page 18-16.
To clear TWCB router limits see “clear router limits (TWCB)” on page 23-17.