Enterasys Matrix DFE-Gold Series

Understanding Transparent Web Cache Balancing (TWCB) clear router limits (TWCB)
23-18 Transparent Web Cache Balancing Configuration
Usage
ThiscommandmustbeexecutedfromtheswitchCLI.
Example
ThisexampleresetstheTWCBcacherouterlimitssettingtothedefaultvalue:
Matrix(rw)->clear router limits twcb-cache
Note: Router limits can also be cleared in the following contexts:
To clear LSNAT router limits see clear router limits (LSNAT) on page 19-34.
To clear NAT router limits see clear router limits (NAT) on page 18-16.
If you do not specify a parameter when issueing a clear router limits command, router limits for
TWCB, LSNAT, and NAT contexts are reset to the default value.