Displaying Neighbors show neighbors
3-2 Discovery Protocols Configuration
Defaults
Ifport‐stringisnotspecified,allNetworkNeighborDiscoveryinformationwillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayNetworkNeighborDiscoveryinformation:
Matrix(rw)->show neighbors
Port Device ID Port ID Type Network Address
--------------------------------------------------------------------------------
fe.1.27 00-00-1d-83-77-3f 10.21.64.135 cdp 10.21.64.135
fe.1.33 00-e0-63-9d-c1-62 10.21.64.21 cdp 10.21.64.21
fe.1.34 00-01-f4-2a-c8-1f 10.21.70.1 cdp 10.21.70.1
fe.1.46 00-01-f4-00-73-00 ge.1.1 lldp 10.21.64.20
fe.1.47 00-01-f4-00-70-18 fe.1.10 lldp
fe.1.51 00-01-f4-00-7d-cc 10.21.65.129 cdp 10.21.65.129
fe.1.51 00-e0-63-86-47-53 10.21.65.128 cdp 10.21.65.128
fe.1.52 00e063d6892f ge.1.1 ciscodp 10.21.85.10
fe.2.3 00e012345666 fe.1.3 ciscodp 10.21.64.60