Enterasys Matrix DFE-Gold Series - Page 406

Enabling/Disabling GVRP clear garp timer
7-28 802.1Q VLAN Configuration
Parameters
Defaults
Atleastoneoptionalparametermustbeentered.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresettheGARPleavetimerto60centisecondsonFastEthernetport5
inmodule2:
Matrix(rw)->clear garp timer leave fe.2.5
join (Optional)Resetsthejointimerto20centiseconds.
leave (Optional)Resetstheleavetimerto60centiseconds.
leaveall (Optional)Resetstheleavealltimerto1000centiseconds.
port‐string Specifiestheport(s)onwhichtoresetGARPtimer(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
Used
intheCLI”onpage 4‐2.