Enterasys Matrix DFE-Gold Series User Manual

Startup and General Configuration Summary
Enterasys Matrix DFE-Gold Series Configuration Guide 2-3
MAC aging time Set to 300 seconds.
MAC locking Disabled (globally and on all ports).
Management
Authentication Notification
Enabled
MTU discovery protocol Enabled.
NetFlow collection Disabled
NetFlow export version Version 5
NetFlow Version 9
template refresh rate
20 packets
NetFlow Version 9
template timeout
30 minutes
Passwords Set to an empty string for all default user accounts. User must press ENTER
at the password prompt to access CLI.
Password aging Disabled.
Password history No passwords are checked for duplication.
Policy classification Classification rules are automatically enabled when created.
Port auto-negotiation Enabled on all ports.
Port advertised ability Maximum ability advertised on all ports.
Port broadcast suppression Disabled (no broadcast limit).
Port duplex mode Set to half duplex, except for 100BASE-FX and 1000BASE-X, which is set to
full duplex.
Port enable/disable Enabled.
Port priority Set to 1.
Port speed Set to 10 Mbps, except for 1000BASE-X, which is set to 1000 Mbps, and
100BASE-FX, which is set to 100 Mbps.
Port trap All ports are enabled to send link traps.
Priority classification Classification rules are automatically enabled when created.
RADIUS client Disabled.
RADIUS last resort action When the client is enabled, set to Challenge.
RADIUS retries When the client is enabled, set to 3.
RADIUS timeout When the client is enabled, set to 20 seconds.
Rate limiting Disabled (globally and on all ports).
SNMP Enabled.
SNTP Disabled.
Spanning Tree Globally enabled and enabled on all ports.
Spanning Tree edge port
administrative status
Enabled.
Table 2-1 Default Device Settings for Basic Switch Operation (continued)
Device Feature Default Setting

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English