Enterasys Matrix DFE-Gold Series

Configuring Port Priority clear port priority
22-4 Port Priority and Rate Limiting Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Thiscommandwillcauseallframesreceivedwithoutapriorityvalueinitsheadertobesetto
priority0.
Example
Thisexampleshowshowtoresetfe.1.11tothedefaultpriority:
Matrix(rw)->clear port priority fe.1.11
port‐string Specifiestheportforwhichtoclearpriority.Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage 4‐2.