Index-2
Login
administratively configured 2-8
default 2-7
setting accounts 2-15
via Telnet 2-8
Loop Protect
about 6-2
configuring 6-65
Loopback Interfaces 16-1
LSNAT 18-1, 19-1
M
MAC Addresses
age time 12-11
displaying 12-10
setting in routing mode 16-17
MAC Authentication 25-26
MAC Locking 24-2
Management VLAN 7-2
MD5 Authentication 21-30
Mirroring Ports 4-51
MTU Discovery Protocol 2-90
Multicast Filtering 9-1, 9-2
Multiple Authentication 27-1
Multiple Spanning Tree Protocol
(MSTP) 6-1
N
Name
setting for a VLAN 7-7
setting for the system 2-50
Neighbors
OSPF 21-47
RIP 21-4
NetFlow
configuring 15-1
versions supported 15-2
Network Management
addresses and routes 12-1
monitoring switch events and
status 11-1
Network Statistics
displaying for switch 11-3
RMON 11-15
Networks
OSPF 21-23
RIP 21-3
Node Alias 14-1, 15-1
NSSA Areas 21-34
NVRAM
clearing 2-97
downloading configuration to 2-87
O
OSPF
Area Border Routers (ABRs) 21-31,
21-45
areas, authentication 21-32
areas, defining NSSAs 21-34
areas, defining range 21-31
areas, defining stub 21-33
configuration mode, enabling 21-22
configuration tasks 21-19
cost 21-24, 21-34
debugging 21-50
hello packet intervals 21-28
information,
displaying 21-42 to 21-48
link state advertisements 21-43
neighbors 21-47
networks 21-23
priority 21-25
redistribute 21-37
retransmit interval 21-26
timers 21-26
transmit delay 21-27
virtual links 21-35, 21-48
P
Password
set new 2-18
setting the login 2-18
Path MTU Discovery Protocol 2-90
Phone detection
Cisco, Siemens and H.323 25-39
PIM 17-1
Ping 11-4, 16-28
PoE 4-13
Policy Management
assigning classification rules 8-7
classifying to a VLAN or Class of
Service 8-8, 8-14
profiles 8-2, 8-21
Port Mirroring 4-52
Port Priority
configuring 22-2
Port String
syntax used in the CLI 4-2
Port(s)
assignment scheme 4-2
auto-negotiation and advertised
ability 4-30
broadcast suppression 4-49
counters, reviewing statistics 4-15
duplex mode, setting 4-24
enabling and disabling 4-20
flow control 4-37
MAC lock 24-5
mirroring 4-51
priority, configuring 22-2
speed, setting 4-24
status, reviewing 4-13
Priority
OSPF 21-25
VRRP 21-64
Priority to Transmit Queue
Mapping 22-5
Prompt
in router mode 2-103
set 2-44, 2-45
PWA 25-11
R
RAD 12-4
RADIUS 25-53, 25-63
RADIUS server 25-54, 25-57, 25-65
Rapid Spanning Tree Protocol
(RSTP) 6-1
Rate Limiting 22-9
Redistribute 21-17, 21-37
Related Manuals xxxv
Reset 2-95
RIP
CIDR 21-13
configuration mode, enabling 21-2
configuration tasks 21-1
distribute list 21-17
neighbors 21-4
network, adding 21-3
offset 21-5
passive interface 21-15
redistribute 21-17
timers 21-6
RMON 11-15
Router Mode(s)
enabling 2-103
preparing for 2-100
Routing Interfaces
configuring 16-3
Routing Protocol Configuration
DVMRP 21-52
IRDP 21-55
OSPF 21-19
RIP 21-1
VRRP 21-61
S
Scrolling Screens 2-10
Secure Shell (SSH) 24-11
enabling 24-11
regenerating new keys 24-12
Security
methods, overview of 24-1, 25-1
Serial Port
downloading upgrades via 2-72
set policy classify 8-11
set policy port 8-6, 8-17
SNMP
access rights 5-18
accessing in router mode 5-3
enabling on the switch 5-20
MIB views 5-22
notification parameters 5-33
notify filters 5-33
security models and levels 5-2
statistics 5-5
target addresses 5-29
target parameters 5-26
trap configuration example 5-3
users, groups and communities 5-10
walk behavior 5-41
SNTP 13-1
Spanning Tree
To Next Page
Loading...
