NXP Semiconductors MPC5606S - Introduction

Reset Generation Module (MC_RGM)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 1071
Chapter 31 
Reset Generation Module (MC_RGM)
31.1 Introduction
31.1.1 Overview
The reset generation module (MC_RGM) centralizes the different reset sources and manages the reset
sequence of the device. It provides a register interface and the reset sequencer. The different registers are
available to monitor and control the device reset sequence. The reset sequencer is a state machine which
controls the different phases (Phase0, Phase1, Phase2, Phase3, and Idle) of the reset sequence and control
the reset signals generated in the system.
Figure 31-1 depicts the MC_RGM block diagram.