NXP Semiconductors MPC5606S - Introduction

System Status and Configuration Module (SSCM)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 1213
Chapter 38 
System Status and Configuration Module (SSCM)
38.1 Introduction
38.1.1 Overview
The System Status and Configuration Module (SSCM), pictured in Figure 38-1, provides central SOC
functionality. On devices with a separate Standby power domain, the System Status block is part of that
domain.
Figure 38-1. System Status and Configuration Module block diagram
38.1.2 Features
The SSCM includes these distinctive features:
• System Configuration and Status
— Memory sizes/status
— Device mode and security status
— Determine boot vector
— Search Code Flash for bootable sector
• Device identification information (MCU ID Registers)
Bus
System Status and Configuration Module
Interface
Password
Comparator
RevID
Hardmacro
Core
Logic
System
Status
Peripheral
Interface
Bus
Debug
Port