EasyManua.ls Logo

NXP Semiconductors MPC5606S - Chapter 14 Integer Unit Features

NXP Semiconductors MPC5606S
1344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
e200z0h Core
MPC5606S Microcontroller Reference Manual, Rev. 7
464 Freescale Semiconductor
Dedicated PC incrementer supporting instruction prefetches
Branch unit with dedicated branch address adder, and small branch target buffer logic supporting
single cycle of execution of certain branches, two cycles for all others
14.2.1.3 Integer unit features
The e200 integer unit supports single cycle execution of most integer instructions:
32-bit AU for arithmetic and comparison operations
32-bit LU for logical operations
32-bit priority encoder for count leading zero’s function
32-bit single cycle barrel shifter for shifts and rotates
32-bit mask unit for data masking and insertion
Divider logic for signed and unsigned divide in 5-34 clocks with minimized execution timing
•32 × 32 hardware multiplier array supports 1 to 4 cycles 32 × 32 32 multiply (early out)
14.2.1.4 Load/store unit features
The e200 load/store unit supports load, store, and the load multiple / store multiple instructions:
32-bit effective address adder for data memory address calculations
Pipelined operation supports throughput of one load or store operation per cycle
32-bit interface to memory (dedicated memory interface on e200z0h)
14.2.1.5 e200z0h system bus features
The features of the e200z0h System Bus interface are as follows:
Independent Instruction and Data Buses
AMBA AHB Lite Rev 2.0 Specification with support for ARM v6 AMBA Extensions
Exclusive Access Monitor
Byte Lane Strobes
Cache Allocate Support
32-bit address bus plus attributes and control on each bus
32-bit read data bus for Instruction Interface
Separate uni-directional 32-bit read data bus and 32-bit write data bus for Data Interface
Overlapped, in-order accesses
14.3 Core registers and programmer’s model
This section describes the registers implemented in the e200z0h core. It includes an overview of registers
defined by the PowerPC Book E architecture, highlighting differences in how these registers are
implemented in the e200 core, and provides a detailed description of e200-specific registers. Full
descriptions of the architecture-defined register set are provided in the Power Architecture Book E
Specification.

Table of Contents

Related product manuals