Display Control Unit (DCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 375
12.3.4.21 COLBAR Registers
The COLBAR registers are used to generate color bars in functional test mode. Eight different pixel values
are taken as input data, to display 8 color bars on the display.
21
M_PROG_END
PROG_END interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
22
M_P2_FIFO_HI_FLAG
P2_FIFO_HI_FLAG interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
23
M_P2_FIFO_LO_FLAG
P2_FIFO_LO_FLAG interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
24
M_P1_FIFO_HI_FLAG
P1_FIFO_HI_FLAG interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
25
M_P1_FIFO_LO_FLAG
P1_FIFO_LO_FLAG interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
26
M_CRC_OVERFLOW
CRC_OVERFLOW interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
27
M_CRC_READY
CRC_READY interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
28
M_VS_BLANK
VS_BLANK interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
29
M_LS_BF_VS
LS_BF_VS interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
30
M_UNDRUN
UNDRUN interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
31
M_VSYNC
VSYNC interrupt mask
0 Interrupt is not masked
1 Interrupt is masked
Table 12-25. COLBAR_n register field descriptions
Field Name Description
COLBAR_n_R Red component value
Table 12-24. INT_MASK field descriptions (continued)
Field Description
To Next Page
Loading...
