NXP Semiconductors MPC5606S - Threshold Register (THRHLR[0:3])

Analog-to-Digital Converter (ADC)
MPC5606S Microcontroller Reference Manual, Rev. 7
156 Freescale Semiconductor
5.4.5.3 Threshold Register (THRHLR[0:3])
The four THRHLRn registers are used to store the user-programmable thresholds’ 10-bit values.
Address: Base + 0x0060 (THRHLR0)
Base + 0x0064 (THRHLR1)
Base + 0x0068 (THRHLR2)
Base + 0x006C (THRHLR3) Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0 0
THRH
W
Reset 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0 0 0 0 0 0
THRL
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Figure 5-19. Threshold Register (THRHLR[0:3])
Table 5-18. Threshold Register (THRHLR[0:3]) field descriptions
Field Description
0–5 Reserved
A write of any value has no effect. The read value is always 0.
6–15
THRH
High threshold value for channel n.
16–21 Reserved
A write of any value has no effect. The read value is always 0.
22–31
THRL
Low threshold value for channel n.