NXP Semiconductors MPC5606S - Register Map

Register Map
MPC5606S Microcontroller Reference Manual, Rev. 7
1282 Freescale Semiconductor
Error Configuration ERROR 16-bit Base + 0x0006
Debug Status Port Register DEBUGPORT 16-bit Base + 0x0008
Reserved — — Base +
(0x000A–0x000B)
Password Comparison Register High Word PWCMPH 32-bit Base + 0x000C
Password Comparison Register Low Word PWCMPL 32-bit Base + 0x0010
Reserved — — Base +
(0x0014–0x3FFF)
Mode Entry Module (MC_ME) Section 25.3, Memory map and register definition 0xC3FD_C000
Global Status ME_GS 32-bit Base + 0x0000
Mode Control ME_MCTL 32-bit Base + 0x0004
Mode Enable ME_ME 32-bit Base + 0x0008
Interrupt Status ME_IS 32-bit Base + 0x000C
Interrupt Mask ME_IM 32-bit Base + 0x0010
Invalid Mode Transition status ME_IMTS 32-bit Base + 0x0014
Reserved — — Base +
(0x0018–0x001F
Reset Mode Configuration ME_RESET_MC 32-bit Base + 0x0020
Test Mode Configuration ME_TEST_MC 32-bit Base + 0x0024
Safe Mode Configuration ME_SAFE_MC 32-bit Base + 0x0028
DRUN Mode Configuration ME_DRUN_MC 32-bit Base + 0x002C
Run0 Mode Configuration ME_RUN0_MC 32-bit Base + 0x0030
Run1 Mode Configuration ME_RUN1_MC 32-bit Base + 0x0034
Run2 Mode Configuration ME_RUN2_MC 32-bit Base + 0x0038
Run3 Mode Configuration ME_RUN3_MC 32-bit Base + 0x003C
Halt0 Mode Configuration ME_HALT0_MC 32-bit Base + 0x0040
Reserved — — Base +
(0x004–0x0047)
Stop0 Mode Configuration ME_STOP0_MC 32-bit Base + 0x0048
Reserved — — Base +
(0x004C–0x0053)
Standby0 Mode Configuration ME_STANDBY0_MC 32-bit Base + 0x0054
Reserved — — Base +
(0x0058–0x005F)
Table B-2. Detailed register map (continued)
Register description Register Name
Used
Size
Address