NXP Semiconductors MPC5606S - Register Descriptions

Display Control Unit (DCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 353
12.3.4 Register descriptions
This section describes the DCU registers.
12.3.4.1 Control Descriptor L0_1 Register (CtrlDescL0_1)
Figure 12-3 represents the control descriptor L0_1 register. This register sets the height and width of the
layer associated with the register.
Soft_Lock
L0_TRANSP
0x318
R 0 0 0 0
SLB_FCOLOR SLB_BCOLOE
0 0 0 0 0 0 0 0 0 0
W
WEN_FCOLOR
WEN_BCOLOR
R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W
Soft_Lock
L1_TRANSP
0x31C
R 0 0 0 0
SLB_FCOLOR SLB_BCOLOE
0 0 0 0 0 0 0 0 0 0
W
WEN_FCOLOR
WEN_BCOLOR
R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W
Table 12-4. Register descriptions (continued)
Name
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31