NXP Semiconductors MPC5606S - Watchdog Threshold Interrupt Mask Register (WTIMR)

Analog-to-Digital Converter (ADC)
MPC5606S Microcontroller Reference Manual, Rev. 7
152 Freescale Semiconductor
5.4.3.6 Watchdog Threshold Interrupt Mask Register (WTIMR)
Reset value: 0x0000_0000
Table 5-13. WTISR field descriptions
Field Description
0–23 Reserved
A write of any value has no effect. The read value is always 0.
24–27
WDGxH
This field indicates whether an interrupt has been generated because the converted value is higher than
the programmed higher threshold.
0 Converted value is lower or equal to the programmed higher threshold (no interrupt generated).
1 Converted value is higher than the programmed higher threshold (interrupt is generated).
28–31
WDGxL
This field indicates whether an interrupt has been generated because the converted value is lower than
the programmed lower threshold.
0 Converted value is higher or equal to the programmed lower threshold (no interrupt generated).
1 Converted value is lower than the programmed lower threshold (interrupt is generated).
Address: Base + 0x0034 Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0 0 0 0 0 0 0 0 MSK
WDG
3H
MSK
WDG
2H
MSK
WDG
1H
MSK
WDG
0H
MSK
WDG
3L
MSK
WDG
2L
MSK
WDG
1L
MSK
WDG
0L
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Figure 5-14. Watchdog Threshold Interrupt Mask Register (WTIMR)
Table 5-14. WTIMR field descriptions
Field Description
0–23 Reserved
A write of any value has no effect. The read value is always 0.
24–27
MSKWDGxH
Mask bit for the interrupt generated because the converted value is higher than the programmed
higher threshold.
0 Interrupt is not enabled.
1 Interrupt is enabled.
28–31
MSKWDGxL
Mask bit for the interrupt generated because the converted value is lower than the programmed
lower threshold.
0 Interrupt is not enabled.
1 Interrupt is enabled.