NXP Semiconductors MPC5606S - Soft Lock DISP_SIZE Register

Display Control Unit (DCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 399
12.3.4.42 Soft Lock DISP_SIZE Register
Figure 12-51 represents the Soft Lock DISP_SIZE register.
Figure 12-51. Soft Lock DISP_SIZE Register
9
WEN_L1_6
Write Enable for Soft Lock Bit SLB_L1_6
0 SLB is not modified
1 Value is written to SLB
10
WEN_L1_7
Write Enable for Soft Lock Bit SLB_L1_7
0 SLB is not modified
1 Value is written to SLB
12
SLB_L1_5
Soft Lock Bit for Control Desc L1_5 Register.
0 Associated protected register is not locked and writeable
1 Associated protected register is locked for write access
13
SLB_L1_6
Soft Lock Bit for Control Desc L1_6 Register.
0 Associated protected register is not locked and writeable
1 Associated protected register is locked for write access
14
SLB_L1_7
Soft Lock Bit for Control Desc L1_7 Register. This bit cannot be cleared once set by software.
Can only be cleared by system reset.
0 Associated protected register is not locked and writeable
1 Associated protected register is locked for write access
Offset: 0x30C Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0
SLB_DISP
0 0 0 0 0 0 0 0 0 0 0
W
WEN_DISP
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Table 12-45. Soft Lock Register L1 field descriptions (continued)
Field Description