NXP Semiconductors MPC5606S - SIGN_CALC_2 Register

Display Control Unit (DCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 381
12.3.4.24 SIGN_CALC_2 Register
Figure 12-33 represents the register for position of the window of interest for CRC calculation.
Figure 12-33. SIGN_CALC_2 Register
12.3.4.25 CRC_VAL Register
Figure 12-34 represents the register presenting the CRC value to the software for comparison.
Figure 12-34. CRC_VAL Register
Offset: 0x21C Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0 0
SIG_VER_POS
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R 0 0 0 0 0 0
SIG_HOR_POS
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Table 12-28. SIGN_CALC_2 field descriptions
Field Description
6–15
SIG_VER_POS
Vertical position of the window of interest of pixels for CRC calculation (in pixels)
22–31
SIG_HOR_POS
Horizontal position of window of interest of pixels for CRC calculation (in pixels)
Offset: 0x220 Access: User read/write
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R
CRC_VAL[0:15]
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R
CRC_VAL[16:31]
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0