Power Control Unit (MC_PCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 987
This register defines for power domain #0 whether it is on or off in each device mode. As power domain
#0 is the always-on power domain (and includes the MC_PCU), none of its bits are programmable. This
register is available for completeness reasons.
Table 29-3. Power Domain Configuration Register field descriptions
Field Description
RST Power domain control during Reset mode
0 Power domain off
1 Power domain on
TEST Power domain control during Test mode
0 Power domain off
1 Power domain on
SAFE Power domain control during Safe mode
0 Power domain off
1 Power domain on
DRUN Power domain control during DRUN mode
0 Power domain off
1 Power domain on
RUN0 Power domain control during Run0 mode
0 Power domain off
1 Power domain on
RUN1 Power domain control during Run1 mode
0 Power domain off
1 Power domain on
RUN2 Power domain control during Run2 mode
0 Power domain off
1 Power domain on
RUN3 Power domain control during Run3 mode
0 Power domain off
1 Power domain on
HALT Power domain control during Halt mode
0 Power domain off
1 Power domain on
STOP Power domain control during Stop mode
0 Power domain off
1 Power domain on
STBY0 Power domain control during Standby mode
0 Power domain off
1 Power domain on
To Next Page
Loading...
