EasyManua.ls Logo

NXP Semiconductors MPC5606S - Page 304

NXP Semiconductors MPC5606S
1344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deserial Serial Peripheral Interface (DSPI)
MPC5606S Microcontroller Reference Manual, Rev. 7
302 Freescale Semiconductor
Table 11-13 describes the fields in the DSPI DMA / interrupt request and enable register.
Table 11-13. DSPIx_RSER field descriptions
Field Description
0
TCF_RE
Transmission complete request enable. Enables TCF flag in the DSPIx_SR to generate an interrupt
request.
0 TCF interrupt requests are disabled
1 TCF interrupt requests are enabled
1–2 Reserved.
3
EOQF_RE
DSPI finished request enable. Enables the EOQF flag in the DSPIx_SR to generate an interrupt
request.
0 EOQF interrupt requests are disabled
1 EOQF interrupt requests are enabled
4
TFUF_RE
Transmit FIFO underflow request enable. The TFUF_RE bit enables the TFUF flag in the DSPIx_SR
to generate an interrupt request.
0 TFUF interrupt requests are disabled
1 TFUF interrupt requests are enabled
5 Reserved.
6
TFFF_RE
Transmit FIFO fill request enable. Enables the TFFF flag in the DSPIx_SR to generate a request. The
TFFF_DIRS bit selects between generating an interrupt request or a DMA requests.
0 TFFF interrupt requests or DMA requests are disabled
1 TFFF interrupt requests or DMA requests are enabled
7
TFFF_DIRS
Transmit FIFO fill DMA or interrupt request select. Selects between generating a DMA request or an
interrupt request. When the TFFF flag bit in the DSPIx_SR is set, and the TFFF_RE bit in the
DSPIx_RSER is set, this bit selects between generating an interrupt request or a DMA request.
0 Interrupt request is selected
1 DMA request is selected
8–11 Reserved.
12
RFOF_RE
Receive FIFO overflow request enable. Enables the RFOF flag in the DSPIx_SR to generate an
interrupt request.
0 RFOF interrupt requests are disabled
1 RFOF interrupt requests are enabled
13 Reserved.
14
RFDF_RE
Receive FIFO drain request enable. Enables the RFDF flag in the DSPIx_SR to generate a request.
The RFDF_DIRS bit selects between generating an interrupt request or a DMA request.
0 RFDF interrupt requests or DMA requests are disabled
1 RFDF interrupt requests or DMA requests are enabled

Table of Contents

Related product manuals