NXP Semiconductors MPC5606S - Page 445

Display Control Unit (DCU)
MPC5606S Microcontroller Reference Manual, Rev. 7
Freescale Semiconductor 443
Figure 12-86. Occurrence of Hsync and Vsync and DataEn for the Entire Frame
12.8.2.5.2 PDI Input data (Internal Sync Extraction mode)
In internal sync mode the timing parameters (horizontal and vertical blanking) are encoded into the data
stream.
Internal sync mode can only be used in 8-bit narrow mode.
In Figure 12-87, XY is used to decode the vertical and horizontal blanking period.
Table 12-68. XYh Value
Bit Value Description
7 1'b1 Always 1'b1. This is checked while
decoding sync preamble
6 F Not considered in the state machine logic
5 V 1'b1 during vertical blanking
1'b0 elsewhere
4 H 1'b0 for start of active video
1'b1 for end of active video
invalid data 1 2 3 4 delta x invalid data
pdi_clk
pdi_datain
pdi_hsync
pdi_de
data enable high during active data
BP_H
FP_H
Data Enable in the horizontal resolution
FP_H and BP_H is programmable through register
pdi_clk
invalid data 1 2 3 4 delta x invalid data
pdi_datain
pdi_vsync
BP_V
FP_Vpdi_de